Click on the image to check the artwork
By certification 
Specifications for the brewing/fermentation tanks
1.Double wall AISI stainless steel 304 design
2.Inner sus304 (3.0mm)with mirror polishing treatment
3.Outer sus304(3.0mm) with 2B-cold-rolled material/mirror polishing processing
4.Insulation:polyurethane-thickness 100mm
5.Jacket(Steam/Cooling):stainless steel 304-thickness 3mm
6.Cleaning with 3600 omni bearing spray ball
7.Design pressure of the tanks:0.3MPa/3.0bar
8.Working pressure of the tanks : <0.2MPa/2.0bar
9.Welding grinded to Ra0.6um
10.Valve pipe fittings supporting;Single tank,single control
1.Double wall AISI stainless steel 304 design
2.Inner sus304 (3.0mm)with mirror polishing treatment
3.Outer sus304(3.0mm) with 2B-cold-rolled material/mirror polishing processing
4.Insulation:polyurethane-thickness 100mm
5.Jacket(Steam/Cooling):stainless steel 304-thickness 3mm
6.Cleaning with 3600 omni bearing spray ball
7.Design pressure of the tanks:0.3MPa/3.0bar
8.Working pressure of the tanks : <0.2MPa/2.0bar
9.Welding grinded to Ra0.6um
10.Valve pipe fittings supporting;Single tank,single control
